Water to Gas Technology

Showing posts with label Oxyhydrogen. Show all posts

Turning Water Into Gas - Can it Happen, and If So, How Does it Work?

Turning water into gas is not a reality and cannot happen. But before you think "yep, I knew it, this whole water for gas thing is a big scam," hear me out. This technology does work, and works very well, but you have to understand HOW it works.

When you use this technology, you are not turning water into gas, but rather into fuel. To fuel a vehicle is to power a vehicle, and this is achieved through a hybrid of water and gasoline. The hydrogen that is in the water combines with traditional gasoline to make a compound that goes by a number of different names, such as HHO gas, Brown gas, and Brown's gas. (the term Brown comes from the inventor Yull Brown, who developed the technology)

When you use HHO in your car, (turning water into gas, if you will) you will see major savings in what you spend on gas each month. People who have installed water gas kits on their cars see their miles per gallon double. But there are other benefits as well. The engine in your car will have a lot more power, because the water will cool the engine down, and a cooler motor puts out more horsepower. Also, turning water into gas is a big benefit for those looking to help our environment, because the emissions that come from the tailpipe are much cleaner than those coming from a traditional setup. And finally, you will not only save money on fuel by turning water into gas, but you will also save money on taxes, since you will be driving a hybrid.

Turning water into gas is the best way to potentially save hundreds of dollars each month on fuel. Go to http://www.adviceforsavinggas.com for a closer look at how to do it

Article Source: http://EzineArticles.com/?expert=Joe_Watson

Water to Gas is it Fact or Fiction?

Sphere: Related Content

A lot has been said about the revolutionary process of making vehicles run on water instead of purely gasoline fuel, which has led to a lot of hubris whether it is actually truu or just a figment of one person’s twisted imagination?

Sounds too good to be true, right? But in reality, water is actually a good source of energy, which if processed properly and it’s energy channeled correctly, is actually a better alternative to petroleum products like gasoline and other forms of fuel.

Although it may still be considered rocket science to actually make the most out of water, but one fact remains about how water can be used for fuel – not water per se, but one of water’s vital elements, which is hydrogen.

The atomic substance that is hydrogen is the leading alternative to conventional petroleum-based fuel.

For now, among the most common operational processes by water to gas, are fuel-saving devices that primarily extract a form of mixed hydrogen and oxygen gas called Brown’s Gas or HHO into the vehicles fuel injection system.

This enriched mixture of oxygen and hydrogen, also called oxyhydrogen, is mixed with gasoline, causing both substances to chemically bond together molecularly and magnetically.

This combination, according to experts, results to better fuel economy and increases mileage per gallon by as much as 25%-50%, depending on the vehicle’s engine make-up and condition.

These gas-saving devices can also increase in engine power, since less pressure is exerted on the accelerator pedal to speed up the engine, thus reducing the amount of gas used to fuel the engine.

Since the oxyhydrogen mixture burns cleaner and more completely, thus it processes more efficiently and maximizes engine power. It also cleans up carbon deposits in the engine and prevents future build-up of carbon.

It can also be environmentally friendly since exhaust emissions are greatly reduced by the oxyhydrogen burning process.

Due to the cooling nature of oxygen and hydrogen, the temperature in the combustion chamber drops slightly, efficiently enhancing fuel combustion and quicker flame spread ratio.

But many are still wondering if the water to gas idea is indeed true or a scam? Surely not, since the technology has been there long enough for others to work on better solutions to harness that potential to replace petroleum with water-based fuel.

Yes, water to gas is true, but for now the system or process of solely using water to fuel vehicles using hydrogen is still not perfected for commercial vehicles, since studies and science is still trying to master the process of extracting hydrogen on a portable and small-scale process, since the current process is very expensive and requires a lot of equipment.

But of course, with the interest attracted by water to gas systems, scams would still abound, since this system is a potential concept that could easily convince unwary individuals to fall prey to misleading schemes.

So, many would still be advised to be wary of such scams perpetrated by unscrupulous individuals.

B that as it may, the technology of water to gas is an innovative temporary yet beneficial answer to call of the times in addressing the common problem of skyrocketing fuel prices, which, eventually, will lead the way to develop cheaper and alternative sources to fuel, especially one that can be good and sustainable for the environment.

What a Miracle! Changing Water to Gas

Sphere: Related Content

Using water as gas supplement for vehicles is an emerging technology. People using this kind of system is claiming that they were able to improve their gas mileage almost up to 60%, making them able to save hundreds of dollars within a year on gas alone.

More and more people are getting intrigued by this technology. The main companies selling this system, would include in their package different parts to install on your car to be able to use water on your engine. They would include hydrogen generators or electrolyzers and other car parts. But is this really possible? Can water really be changed into a fuel supplement for gasoline that would enable your vehicle to run smoother?

With the water to gas technology, HHO, also called hydroxy or Brown’s gas is used to supplement its fuel. It doesn’t mean that you would have to put a water hose into your gas tank and use it as fuel. HHO is also called oxyhydrogen and contains a mixture of hydrogen (H2) and oxygen (O2). Chemist William Nicholson was the first person to decompose or separate water into its component gasses back in 1800s.

Oxyhydrogen will burn up when brought to its kindling point. Kindling point will be the lowest temperature wherein a substance will spontaneously ignite without the need for a spark or flame. When ignited, oxyhydrogen will convert into water vapour and then will release its energy.

This concept was applied on lights. Oxyhydrogen lamps, like the limelight, is using an oxyhydrogen flame to heat a piece of lime to give light. Another product is the oxyhydrogen torch. This torch is an oxy-gas torch. It burns hydrogen with oxygen. This equipment is used for cutting and welding metals, glass and thermoplastics. The flame begins a short distance from the tip of the torch; if the distance is great enough the torch tip can remain cool. Oxyhydrogen is also claimed to increase the efficiency in automotive engines. One liter of water is said to creat 1860 gallons of oxhydrogen.

So why use the name Brown’s gas for oxyhydrogen? Oxyhydrogen gas produced by a common-ducted electrolyzer has been referred to to as Brown’s Gas. It was named after Yull Brown who received a patent for a series cell common ducted electrolyzer made in 1977 and 1978. Actually, Brown’s gas is not used in his patents, the gas produced has been referred to “ a mixture of oxygen and hydrogen”. Brown's Gas also claims that it can be used for the following applications although further research may be required:

1.Air conditioning and cooling
2. Atmospheric motors
3. Cleansing of smokestack
4. Coal to Oil conversion
5. Curing
6. Deep-sea life support
7. Destruction of toxic wastes
8. Drying of fruit and legumes
9. Fuel Cell
10. Glazing and Kiln operation
11. Graphite production
12. Heating
13. Hydrogen production
14. Mineral separation
15. Nuclear waste decontamination
16. Ore separation
17. Oxygen production
18. Production of hard materials
19. Production of electricity
20. Pure water production
21. Silica conversion
22. Space life support
23. Underwater welding
24. Vacuum systems
25. Water pumps
26. Welding and brazing

There could numerous ways this water to gas technology can be used. Numerous ways that could make our lifestyle more efficient and less costly. But the road to discovery is a very hard road. It took decades before this technology was made available for us. Hopefully, it would take that long too just to be able to prove and provide other ways to use and benefit from this technology.

How Water to Gas Works

Sphere: Related Content

Practically everyone is looking for a way to save money on gas and new gas saving devices like water for gas gadgets are making people realize that concept, but how does water for gas work?

One that has been proven effective to make people save money on gas is a water powered car and it has proven to be effective at increasing your gas mileage.

Sounds preposterous, but this is actually a car that runs on water as well as fuel and surprisingly enough, it can be any gas-fuelled car.

Any vehicle can be converted into a water powered car to save money on gas, improve your engine life, and even benefit the environment.

Here’s how a water powered car works.

First thing you should know is that your car will not run on water alone, make no mistake.

It will use a combination of water and gasoline to power the car. Although you still need to fill up your car, it will happen less often.

The way you use water to increase your fuel economy and reduce fuel consumption is fairly simple.

A water to gas device is installed on your vehicle that breaks water down into its original elements, hydrogen and oxygen.

The device then feeds these elements into the engine with gasoline and creates an effective mixture that increases gas mileage by up to 70%.

This mixture is called HHO (oxyhydrogen) or Brown’s gas and helps maximize fuel combustion, reducing harmful unburned fuel and carbon exhausts.

To make this water to gas process work on your car, you will have an option of buying a pre-made conversion kit and have it professionally installed or learn how to build and install one yourself.

While it may seem like a complicated system, it’s really a simple task to accomplish – not rocket science for first-timers.

Armed with some basic knowledge of cars, it shouldn’t be a problem for you to do it yourself and you could be on your way to saving those dollars on saving gas. You’ll also save a lot of money by doing it yourself and not have to pay for professional service.

Many pre made water to gas conversion kits can be pretty expensive, so is having them installed.

You can buy all of the tools and supplies you need to do it on your own for around $100-$200, depending on the tools and the quality of materials you hope to use. In the long run, this is but a fraction of what you would pay for a commercial system and the money you save on fuel will make up for your expenses in less than a month.

There are a lot of online guides on the Internet and these guides will show you step by step processes on how to build the system.

It will provide you a list of supplies you need and surprisingly, can be easily found at your local hardware store.

These kits can be installed on any vehicle, require very minimal space around 4 inches by 10 inches of free space.

One thing to consider though, is to install it in an easily accessible area where it could be easily accessed for inspection and maintenance.

The concept of a water powered car is more of a reality than many people think and actually, the systems are not complicated and very easy to install.

With just a little money and time, you can run your car on water and save a ton of money on fuel costs, all you need to know is how water to gas works.

Behind the Scene: How Water to Gas Technology Works

Sphere: Related Content

Water4Gas, runyourcaronwater, Fueltrips, drivewithwaterfuel, wam-a-bam. Sound familiar? These would be some of the sites that offer technology to run cars on Hydrogen (HHO or Brown’s Gas) which can also be called Hydroxy, that comes from water. These are the main water to gas players in the market nowadays. So how does this technology works?

Whenever you decide to upgrade to this system and decided to give one of these companies a call, they would never ask you to put water to your gas tank. Nor they will ask you to buy a new car with the water to gas engine. Actually, it’s very simple. You don’t have to change your engine or you car computer.

The water to gas conversion kit comes in with different part that can be easily assembled at home over the weekend. It only requires to use a few basic tools. The conversion kits major parts would be:

Electrolyzer (some call it "Hydrogen Generator"): these would be the containers (quart sized) can contain about 950cc of ordinary tap water or distilled water (based on the requirement of the manufacturer of the conversion kit). It could be glass, metal or plastic containers.

MAP Sensor Enhancer: this electronic device reduces fuel consumption without modifying the engine or the computer

Vaporizer: adds water vapour to the engine to cool it down, improves combustion and fuel economy.

Fuel Heater: pre-heats your gasoline for better gas economy, using only energy from the radiator that gets wasted otherwise, it requires no modifications done to the radiator or its hoses#

PCV Enhancer: another great companion to your hydrogen system that improves the PCV (Positive Crankcase Ventilation) function, protects your engine and saves gas.
Fuse holder + wiring. Connect to the 12 volts.

Vacuum T-connector: helps you splice the vacuum line for feeding the hydrogen and oxygen into the engine.

Catalyst: Ordinary baking soda.

Pure hydrogen is dangerous, especially storing it in large compressed amounts in containers. It can result into explosion, however water does not explode. That is why water to gas conversion kits do not use pure hydrogen. Since hydrogen is already compressed or present in water, it is safely and easily released and consumed. So when HHO is produced, the by-product left is water. No harmful chemicals are being emitted from this system. You just need enough space under the hood to place a quart sized jar to put the water and catalyst. Catalyst is the substance that helps the electricity separate water into HHO. Nothing will happen without this material. This system uses ordinary baking soda, you can easily grab it from the nearest grocery store or from your kitchen cabinet.

Water is converted into HHO gas using electricity from the car’s battery. The quart-sized water jar with a little bit of baking soda is placed under the hood. This device is connected with some fuse holder and wires to the car’s battery. It gets vacuum and electricity from the engine produces the HHO gas. The HHO gas is supplied to the carburaetor. The generator from your battery connects the device via the ignition switch. This prevents hydrogen production when the engine is off and uses less electricity.

Knowing how safe and easy to assemble to water to gas conversion kits provides us a view on an alternative way to save our trips to the pump. But always, it is very important whenever we’ll be using this system or any system at all that will help us economically, to follow the provided instructions and know the product that we’re going to purchase and use.